Oxygen Measurement-Steam Equipments Pvt Ltd. Design, Development, Manufacture, Supply and after sales service of Gas and Liquid Analytical Systems, Steam and Water Analysis Systems (SWAS) and Sample Coolers used in Refineries, Power Plants and Process Industries.

Application Information

Paramagnetic

Paramagnetic Oxygen Analyzer - 3000MA

Model 3000MA Paramagnetic Percent Oxygen Analyzer is a versatile, microprocessor based instrument specifically designed to detect oxygen in a variety of gases. The 3000MA is a precise, cost effective instrument capable of measuring percent oxygen in as low as the 0-1% range. Drawing on the solid performance of Teledyne’s highly successful 3000 series control platform, the 3000MA provides the user with a wide variety of features and options to satisfy virtually any application.

Features Proven, robust paramagnetic sensor Three user-selectable ranges plus cal range Signal and Range ID output: isolated 4-20 mADC Programmable autoranging Two fully adjustable concentration alarm set points with programmable relay functions, Form C contacts, 3A resistive Calibration contact span/zero, Form A normally open contact, 3A resistive Self diagnostics with Form C failure alarm contacts Full duplex RS-232C communication link Five digit oxygen concentration LED display 2x20 alphanumeric vacuum fluorescent display for set up and diagnostics Stainless steel sample passages and fittings Universal power supply: 100-240 VAC / 50-60 Hz Remote calibration digital inputs
Click Here to Download Manuals \| Click Here to Contact for Purchase

Paramagnetic Oxygen Analyzer - 3010MA

Model 3010MA Paramagnetic Percent Oxygen Analyzer is a versatile, microprocessorbased instrument specifically designed for oxygen purity analysis. The 3010MA is a precise, cost effective instrument capable of measuring percent oxygen in specific ranges as required by the air separation and medical gas qualification industries. Drawing on the solid performance of Teledyne's highly successful 3000 series control platform, the 3010MA provides the user with a wide variety of features while maintaining cost effectiveness.

Features Proven, robust paramagnetic sensor Three user-selectable ranges plus cal range Signal output: isolated 4-20 mADC Programmable autoranging Two fully adjustable concentration alarm set points with programmable relay functions, Form C contacts, 3A resistive Calibration contact span/zero, Form A normally open contact, 3A resistive Self diagnostics with Form C failure alarm contacts Full duplex RS-232C communication link Five digit oxygen concentration LED display 2x20 alphanumeric vacuum fluorescent display for set up and diagnostics Switch selectable power supply: 90 - 130 or 200 - 240 VAC at 47 / 63 Hz Remote calibration digital inputs
Click Here to Download Manuals \| Click Here to Contact for Purchase

Zirconia

	Zirconium Oxide Trace Oxygen Analyzer - 3000 ZA-XL
	Teledyne manufactures a variety of oxygen analyzers utilizing state-of-the-art technologies to monitor oxygen in virtually all industrial bulk gases supplied by the air separation community. To compliment our electrochemical fuel cell and paramagnetic oxygen products, Teledyne has developed a zirconium oxide-based (ZrO2) trace oxygen analyzer, the 3000ZA-XL, which can be readily applied on inert, H2 / HC-free, gas streams. The unique, miniature, amperometric-based ZrO2 sensor provides the operator with unrivaled repeatability, responsiveness and stability.

Features • Highly flexible, field-proven Series 3000 platform • Programmable Auto-Calibration capabilities • User selectable ranges • Helium leak checked sample handling system • High sensitivity of 25 ppb or better
Click Here to Download Manuals \| Click Here to Contact for Purchase

	Zirconium Oxide Flue Gas Oxygen Analyzer - 9060
	The 9060 provides standard programmable automatic calibration and auto-purge outputs. The user can program the cal/purge sequence to an alarm relay for external indication. The 9060 has also been designed with a probe diagnostic loop to continuously monitor for probe impedance to ensure the sensor is functioning properly. The electronics self-calibrates all inputs every minute.

Application • Gas, oil, pulverized coal and black liquor boilers • Cement, lime and ceramic kilns • Refinery process heaters and furnaces • Blast furnace ovens • Soaking pit and heat treating furnaces • Thermal cracking furnaces • Catalyst regeneration • Asphalt processes • Utility boilers
Click Here to Download Manuals \| Click Here to Contact for Purchase

	MODEL 9070 O2 and CO2 Food Package Analyzer
	Model 9070 Food Package Analyzer is an ideal unit for spot checking gas measurements within food containers for ongoing validation of packaging machines. After inserting the sample probe into a package or container, the 9070 automatically draws a sample and displays the lowest reading of oxygen and the highest reading of carbon dioxide. There is no need to touch a key or button during the analytical process.

Features Two isolated, linearized 4-20 mADC outputs Computer / printer interface for data Self diagnostic alarm LCD display content options One user-programmable alarm relay Accessory kit for various applications
Click Here to Download Manuals \| Click Here to Contact for Purchase

Microfuel Cell

MODEL 3000PA Process Percent Oxygen Analyzer

Model 3000PA brings percent oxygen analysis to new heights of precision. Using advanced microprocessor technology, this model makes the task of percent oxygen analysis easier, faster and more accurate than ever before. Simple menu choices, membrane command switches and a large LED display make setup and operation of a 3000PA clear and quick.

Features • Three user-selectable ranges plus cal range (0-25%) • Signal output: 0-1 VDC • Programmable Auto Ranging • Range ID output: 0-1 VDC • Range ID contacts (Quantity 4). Form A normally open contacts, 3A resistive • Two fully-adjustable concentration alarm points with programmable relay function. Form C contacts, 3A resistive • Programmable auto cal/zero. Form A normally open contact relay signals • Remotely initiated cal/zero via customer supplied 24 VDC signal • Self diagnostics with Form C failure alarm contacts • Full duplex RS232 communication link • Five digit oxygen concentration LED display • Backlit 2 x 20 line alphanumeric VFD for setup and diagnostics • Sampling system: nylon with brass fittings • Sample flow indicator • Universal power supply: 85-250 VAC 47-63 Hz
Click Here to Download Manuals \| Click Here to Contact for Purchase

	Process Trace Oxygen Analyzer
	Model 3000TA is designed to make the task of trace oxygen analysis easier, faster and more precise than ever before. Simple menu choices, membrane command switches and a large LED display make setup and operation clear and quick.

Advantages • Linearity of analysis across 3 user-selectable ranges • Remote access to all functions from computer • Extended-life, maintenance-free sensor • Ambient air calibration • AutoRanging to follow process upsets
Click Here to Download Manuals \| Click Here to Contact for Purchase

	Trace and Percent Oxygen Transmitter
	The INSTA TRANS™ O2 transmitter. By applying lessons learned from our Series 300T & 300P intrinsically safe oxygen transmitter designs introduced in the late 1980s, and adding those parameters required by today’s users, the Insta Trans offers unprecedented: • Flexibility • Ease of use • Quick recovery on ppm O2 applications (when changing out sensors) • Reliability • Cost effectiveness

Advantages • Built-in digital display • Insta Trace oxygen sensor (ppm appls) • Simple intuitive controls • Easy field calibration and range selection • SS or nylon wetted parts • Weather tight NEMA-4 construction • Intrinsically safe operation (optional) • Reverse voltage protection and temp compensation • Digital electronic control circuitry with permanent SPAN setting memory
Click Here to Download Manuals \| Click Here to Contact for Purchase