Application Information
 
 
 
  Heat Actuated Trap (HAT)  
 
Since HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems. The unique ram-style plug & seat provide reliable, tight shut off longer than any other design available.
 
     
 
Design Features

* Stainless body, fittings, spring and plug
* Corrosion resistant - Long service life
* Most narrow temperature band available
* Compact, low mass - Fast response
* Ram-type plug for tight reliable shutoff
* Downstream actuator for greater sensitivity
* Sensitive to temperature only
* Unaffected by pressure variations
* Easy installation with pipe wrench
* Discharges the minimum amount of water required to prevent freeze damage

 
 
     
 
  Heat Actuated Trap (HAT/RA)  
 
The model HAT/RA reverse acting valve can be used to regulate the flow of glycol, water or other media, in critical applications or to economically remove heat from equipment or a process.
 
     
 
Design Features

* All stainless steel body, fittings, spring, and plug
* Compact, low mass - Fast response
* Corrosion resistant - Long service life
* Most clog-resistant design available
* Operates in narrow temperature band
* Unaffected by pressure variations
* Easy installation with pipe wrench
* Operates in any orientation
* Discharges the minimum amount of liquid required to keep liquid temperature within safe limits

 
 
     
 
  Heat Actuated Trap with leak port (HAT/RA-LP)  
 
HAT/RA-LP valves are perfect to control cooling water for compressors, engines, heat exchangers, welding equipment, electrical equipment, molding equipment, pump bearings
 
     
 
Design Features

* 100% Factory tested
* Stainless steel body, fittings, spring and plug
* Compact, low mass for fast response
* Corrosion resistant for long service life
* Most clog resistant design available
* Narrow temperature band
* Modulation throughout temperature range
* Sensitive to fluid temperature only
* Unaffected by pressure variations
* Easy to install
* Operates in any orientation
* Control leakage for increased sensitivety

 
 
     
  Tube Valve Heat Actuated Trap (TV/HAT)  
 
These valves save space, eliminate the use of extra, expensive and time consuming piping. They install in seconds. The unique ram-type plug & seat provide reliable, tight shut off longer than any other design available. TV/HAT valves are covered with our standard 36 month warranty & service policy to further reduce maintenance cost. Since TV/HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems.
 
     
 
Design Features

* Compact, low mass for fast response
* Corrosion resistant for long service life
* Stainless steel body, fittings, spring and plug
* Ram-type plug for tight, reliable shutoff
* Eliminates live steam losses
* Operates in narrow temperature band
* Downstream actuator for greater sensitivity
* Operating temperatures unaffected by pressure
* Wide choice of set-points

 
 
     
 
  Tube Valve Heat Actuated Trap (TV/HAT/RA)  
 
The TV/HAT/RA continually senses fluid temperature and automatically modulates to maintain desired temperature. Optimum operating temperature improves system efficiency, reduces wear and conserves energy. Therm-Omega-Tech valves are designed around our exclusive Thermoloid® sensor/controller which is the most advanced and reliable thermal actuator of its type available today. All Therm-Omega-Tech valves are factory tested and calibrated to assure unsurpassed accuracy, reliability and quality.
 
     
 
Design Features

* 100% Factory tested
* Stainless steel body, fittings, spring and plug
* Compact, low mass for fast response
* Corrosion resistant for long service life
* Most clog resistant design available
* Narrow temperature band
* Modulation throughout temperature range
* Sensitive to fluid temperature only
* Unaffected by pressure variations
* Easy to install
* Operates in any orientation

 
 
     
 
  Tube Valve Heat Actuated Trap with Leak Port (TV/HAT/RA-LP)  
 
The TV/HAT/RA continually senses fluid temperature and automatically modulates to maintain desired temperature. Optimum operating temperature improves system efficiency, reduces wear and conserves energy. Therm-Omega-Tech valves are designed around our exclusive Thermoloid® sensor/controller which is the most advanced and reliable thermal actuator of its type available today. All Therm-Omega-Tech valves are factory tested and calibrated to assure unsurpassed accuracy, reliability and quality.
 
     
 
Design Features

* 100% Factory tested
* Stainless steel body, fittings, spring and plug
* Compact, low mass for fast response
* Corrosion resistant for long service life
* Most clog resistant design available
* Narrow temperature band
* Modulation throughout temperature range
* Sensitive to fluid temperature only
* Unaffected by pressure variations
* Easy to install
* Operates in any orientation

 
 
     
 
  ¼" Heat Actuated Trap (ECONO/HAT-RA)  
 
These valves save space, eliminate the use of extra, expensive and time consuming piping. They install in seconds. The unique ram-type plug & seat provide reliable, tight shut off longer than any other design available. ECONO/HAT-RA valves are covered with our standard 18 month warranty & service policy to further reduce maintenance cost. Since ECONO/HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For temperature sensitive applications, such as instrument or certain processes, the reduced temperature available for tracing simplifies operations and eliminates overheating problems.
 
     
 
Design Features

* Incredibly compact, low mass - Fast response
* Corrosion resistant - Long service life
* All brass body, stainless steel spring and plug
* Ram-type plug for tight reliable shutoff
* Eliminates live steam losses
* Narrow temperature band
* Downstream actuator for greater sensitivity
* Operating temperatures unaffected by pressure
* Wide choice of set points

 
 
     
 
  ½" HAT/RA-HP (EPDM Seals)  
 
The HAT/RA-HP (Heat Actuated Trap/Reverse Acting - High Pressure) valve is commonly used as a thermal pump relief valve on high pressure water pumps. It can also be used to regulate the flow of glycol, water or other media in critical applications or to economically remove heat from equipment or a process.
 
     
 
Design Features

* All stainless steel construction
* Compact, low mass - Fast response
* Corrosion resistant - Long service life
* Most clog-resistant design available
* Operates in narrow temperature band
* Unaffected by pressure variations
* Easy installation with pipe wrench
* Operates in any orientation
* Discharges the minimum amount of water required to keep water temperature within safe limits

 
 
     
 
  ½" High Sample Temperature Valve (1/2 HST)  
 
The HST valve is typically used as a high sample temperature safety shutoff valve for process sampling. The HST valve is typically installed between the sample cooler and the sample analyzer to protect the analyzer instruments from over-temperature conditions. The HST valve has a maximum operating pressure of 3000PSIG with a maximum operating temperature of 250°F. The unique ram-style plug & seat provide reliable, tight shut off. All HST valves are covered by a 36 month prorated warranty.
 
     
 
Design Features

* Stainless body, fittings, spring and plug
* Corrosion resistant - Long service life
* Most narrow temperature band available
* Compact, low mass - Fast response
* Ram-type plug for tight reliable shutoff
* Sensitive to temperature only
* Unaffected by pressure variations
* Operates in any orientation
* Easy installation with pipe wrench

 
 
     
 
  ½" Thermostatic Mixing/Diverting Valve (1/2 M/D-316S/S)  
 
The Therm-Omega-Tech Model M/D temperature control valve is designed for 3-way mixing or diverting applications. For fast response, the valve is compact and low mass. Therm-Omega-Tech's valves are designed around our exclusive Thermoloid sensor/controller that automatically and accurately proportions the flow in response to fluid temperature. The Thermoloid sensor/controller is the most advanced and reliable thermal actuator of its type available today.
 
     
 
Design Features

* Open Temperature: 55ºF Temperature Set Point
* Temperature Control Valve - All 316 Stainless Steel